Types of PLA filament: PLA+, PLA Meta, HS-PLA, Matte and Silk

Previously, there was essentially only one PLA. Today, the situation is different. Manufacturers mix various additives and modify the material properties to suit specific needs. We test all these variants on our own printers. We will look at what variants actually exist today and what they are suitable for, so users do not hesitate unnecessarily when choosing.

Spool of PLA Meta filament black, Prof. Lab, 1.75 mmSpool of Silk PLA filament gold, Prof. Lab, 1.75 mm
PLA Meta and Silk PLA. Both are PLA, yet they print and behave differently.

Classic PLA

This is the absolute basics. If printing models that will not be mechanically stressed and will not lie behind a car window in summer, classic PLA is an ideal choice. It prints very easily and forgives many mistakes. We recommend setting the nozzle to 190 to 220 °C. The bed can remain cold. If using a heated one, a maximum of 60 °C is enough. It is not necessary to close the printer in an enclosure and it is advisable to leave the print cooling running at 100 percent. A major disadvantage is temperature resistance. The material softens around 60 °C. If printing decorations or prototypes for the desk, it is a suitable material.

PLA+ (PLA Plus)

For printing parts that must withstand something without having to deal with more complex materials, we stock PLA+. It is a tougher version of classic PLA. It is not as brittle and will rather bend on impact than break outright. It prints just as easily as the basic variant. It is advisable to raise the nozzle temperature to 200 to 230 °C, keeping the bed at 0 to 60 °C. If maximum strength from the material is needed, we recommend increasing the nozzle temperature to the upper limit and slightly reducing the cooling fan power. The layers will then fuse together better.

PLA Meta

PLA Meta by Prof. Lab is a modified PLA that melts more smoothly. It has very low shrinkage and prints without a closed chamber with the nozzle at 190 to 220 °C and the bed at 0 to 60 °C. The resulting surface has a satin appearance. It is also slightly tougher than ordinary PLA. To achieve an optimal satin appearance, we recommend printing at the lower limit of the temperature recommendation. It can be found in our PLA Meta section.

HS-PLA (High-Speed PLA)

With the advent of fast printers like Bambu Lab, Prusa MK4 or Creality K1, the need for a material that can melt fast enough has emerged. Ordinary PLA at speeds around 300 mm/s and more often fails to flow through the nozzle, which leads to skipped layers. HS-PLA has a specially modified melt flow index. We recommend setting the nozzle to 210 to 240 °C, the bed to 0 to 60 °C. It is advisable to leave the printer open or at least open the door. One important rule applies here. At maximum print speeds, the nozzle temperature must be increased towards the upper limit so that the plastic has time to heat up.

Matte and Silk PLA

These two variants serve purely for appearance. Matte PLA prints at 190 to 220 °C. Its advantage is that the matte surface hides print layers. Models look like they are cast. Silk PLA, on the other hand, offers a highly glossy, pearlescent appearance. It prints at 200 to 230 °C. To make the gloss as high as possible, the outer walls must be printed slowly, typically around 30 to 40 mm/s. Both of these decorative variants share one common characteristic. They are mechanically weaker and more brittle than ordinary PLA. We do not recommend using them for functional parts.

Comparison table of PLA variants

Variant Nozzle temperature What it excels at What to watch out for
Classic PLA 190 to 220 °C Easy printing, price, sharp details It is brittle, softens at 60 °C
PLA+ 200 to 230 °C Higher toughness, less brittleness Still softens at low temperatures
PLA Meta 190 to 220 °C Satin surface, smooth melting Temperature must be tuned for best appearance
HS-PLA 210 to 240 °C High print speeds over 300 mm/s Full benefit only on fast printers
Matte PLA 190 to 220 °C Hides layers, great appearance Lower strength, only for decorations
Silk PLA 200 to 230 °C Pearlescent gloss Brittleness, need to print slowly

Nozzle temperature by PLA type

The range in which we print individual variants. The exact value will always be found on the specific spool.

PLA
190-220 °C
PLA Meta
190-220 °C
Matte PLA
190-220 °C
PLA+
200-230 °C
Silk PLA
200-230 °C
HS-PLA
210-240 °C
180 °C205 °C230 °C255 °C

Print HS-PLA at high speeds closer to the upper limit, Silk PLA on the contrary more slowly.

Which PLA to choose for a specific project

To make the choice easier, we have prepared a short overview of situations commonly encountered during printing.

  • Printing figures or statues: Choose Matte PLA. It hides layers and the model will look professional.
  • Needing a glossy vase: Reach for Silk PLA and slow down the outer walls.
  • Printing a mechanical part for the interior: PLA+ is ideal. It withstands more than the basic version.
  • Having a new fast printer and printing large models: HS-PLA will save time and ensure good extrusion.
  • Wanting a nice surface with minimal shrinkage: PLA Meta is a great choice for visual parts.

Filament drying

Although PLA is not as susceptible to moisture as other materials, it occasionally gets damp. This can be told by the spool popping during printing, bubbles forming or the material stringing excessively. In such a case, the filament needs to be dried. We recommend using a special filament dryer or a food dehydrator for drying. An oven is risky. It has large temperature fluctuations and the spool can easily deform in it. Dry PLA at 45 °C for 4 to 6 hours. After drying, store the spool in a closed box with silica gel.

Frequently asked questions (FAQ)

What is PLA Meta?

It is a specially modified PLA blend characterized by better melt flow and very low shrinkage. The resulting models have an attractive satin surface and the material is slightly less brittle than standard PLA. It prints at the same temperatures.

Is HS-PLA needed for a Bambu Lab printer?

It is not an absolute necessity, but we highly recommend it. If the full speed potential of these printers is to be used, ordinary PLA often fails to melt fast enough and the layers do not bond well. HS-PLA is designed exactly for these high speeds.

Why is printing from Silk PLA brittle?

The additives that give Silk PLA its pearlescent gloss disrupt the bonds between the plastic layers. The material is therefore inherently much more brittle than ordinary PLA. It is intended exclusively for decorative purposes, not for functional parts.

How is it known that PLA is damp?

Damp PLA manifests itself in several ways. The printer pops or hisses when extruding plastic. Tiny bubbles appear on the surface of the print and the material strings much more, meaning it pulls thin hairs between nozzle travels.

Can PLA handle outdoor use?

It cannot. All PLA variants start to soften around 60 °C. If a PLA print is left in direct sunlight or in a closed car in summer, it will deform. For outdoor use, it is necessary to choose materials like PETG or ASA.